6 Ways to Save Energy During Spring

The weather is getting warmer; it's time to pull out the grill, call the pool cleaner back, and get those gardening tools out of the basement. It's spring! But spring also means it's time to look at how you can save the most energy and the most money. Many Ways to Save A lot of…

The weather is getting warmer; it's time to pull out the grill, call the pool cleaner back, and get those gardening tools out of the basement. It's spring! But spring also means it's time to look at how you can save the most energy and the most money.

Many Ways to Save

A lot of people can tolerate cold weather better than hot weather, which means, as the weather gets warmer and warmer, it will become increasingly difficult to fight the impulse to turn on the air conditioning and leave it on for hours. Fortunately, there are several things you can do to help keep your home cool without running up your energy bill.

  1. Take it easy on the thermostat :
    • Set the temperature as high as you can while still being comfortable. The smaller the difference between the indoor and outdoor temperatures, the lower your bill will be.
    • Keep the house warmer than usual when you are away, cool when you get home. Set “Away” and “Home” temperatures easily with a programmable thermostat.
    • Keep in mind : Your house will not cool any faster if you set thermostat to a colder temperature than usual. In fact, this will likely result in unnecessary expense and excessive strain on the cooling system.
  2. Make the most out of your windows :
    • Prevent heat from getting in through the windows by installing window coverings such as blinds (interior and / or exterior), awnings, high-reflective films, draperies, shades, insulated panels, and shutters.
    • If you live in an area where it cools off at night, turn your air conditioning and open your windows while you sleep. When you wake up, shut the windows and blinds to keep the cool air in, unless there's still a cool breeze. You can still get some good cool air into the house in the early morning before the sun starts hitting your house / yard.
  3. Turn on those ceiling fans :
    • By using your ceiling fans in combination with air conditioning, you can actually set thermostat four degrees higher but remember that fans cool people, not rooms. If you leave a room, turn off the fan.
    • Turn on your bathroom fan when taking a shower or bath to remove the humidity and heat.
  4. Drop the water temperature :
    • Your water heater uses 18 percent of your home's energy-use. Turn the temperature down to 120 degrees F.
  5. Minimize appliance-use and artificial lighting :
    • Using the oven on hot days will make the house warmer and subsequently more difficult to cool. Stick to the stove, microwave, or grill outside.
    • Minimize using a computer or TV, running the dishwasher, or using hot devices like hair dryers.
    • Install efficient lighting that does not release much heat.
  6. Seal leaks to keep the hot air out :
    • Seal cracks to keep warm out from leaking into the house.
    • Add weatherstripping or caulk to seal leaky windows and doors.

The Life Cycle and Span of LED Lights

Many traditional halogen lamps required a duty cycle. This means that you could run the light for roughly 15 minutes and then had to leave the light off for 15 minutes. This preserved the length of the lamp, but added a severe limitation to the fixtures effectiveness.

Many traditional halogen lamps required a duty cycle. This means that you could run the light for roughly 15 minutes and then had to leave the light off for 15 minutes. This preserved the length of the lamp, but added a severe limitation to the fixtures effectiveness.

Locations Stay Connected With Remote Area Solar Systems

When building a new home or business, you may run into one very difficult problem, which is that your location is not covered by the area's electrical grid. This will require you to install a Remote Area Solar System to ensure your power needs are met. You will need to work with a company that…

When building a new home or business, you may run into one very difficult problem, which is that your location is not covered by the area's electrical grid. This will require you to install a Remote Area Solar System to ensure your power needs are met. You will need to work with a company that specializes in this particular type of system and can create a grid that will work for your individual needs.

There are many aspects that will need to be evaluated before creating your system. One important factor is the amount of energy you require or the load. This will differ depending on the type of establishment you are building. Of course, whoever you work with will want to do a thorough site evaluation of your property before beginning.

Another big aspect that will vary from person to person is your budget. You will want to make sure you are working with a company that will supply top notch service while also offering competitive pricing. You may want to ask about the option of having government assistance. Sometimes installing a remote area system will qualify you for monetary help from the government.

Next, you will want to work with your company to design a system that fits your individual needs. You will need someone who will work with you to explain each product and the technology behind it. There are many components that make up a remote area system, each of which is important to its overall functionality.

The first component you will choose for your system is the solar modules. These are what captures the sun's energy and converts it to electricity for your home. Next is a charge controller, which helps to regulate the charge from your panels into the batteries. This also helps keep the electrical storage from discharging into the solar modules at night.

The next major component is the battery. This is fairly self-explanatory as it works like a common battery by storing power from your panels and then discharging it as needed. The type of battery you use will depend on the system size you require. The final component needed is an inverter. The inverter changes the power generated from the sun into 240 volt AC electricity which can be used through your home.

Of course, the largest step in getting an off-grid system installed is the installation itself. It is important that the company you work with has licensed technicians who are experienced with this type of installation. Another great perk is that they are available for any future maintenance procedures.

There are many benefits to installing your own system. One of the biggest benefits for you is that you will be delivered quality energy for free. Since your panels will take in energy from the sun, you are constantly being supplied free, noiseless, and clean energy. This benefit will quickly make up for any installation fees.

Then there is the benefit that your system will have on the environment. You will be reducing your carbon footprint while lowering the greenhouse gas emissions. This will, in turn, lower the amount of pollution in the air and help to create a better Earth for you and future generations.

Whichever company you work with, it is vital that they explain every aspect of creating your custom remote area system. You will want to work with them every step of the way to design a system that fits your individual needs and budget. It is also important that the work they do meet the Australian Standards. With the right help, you can have clean, dependable energy anywhere.

Five Must Haves If the Power Goes Out

Power outages can happen at any point in time. The power lines can get compromised, a storm is bearing down on you or there is a curfew in your area. If you are prepared for power outages, you will get the opportunity to stay away from hassle during such a situation. Here is a list…

Power outages can happen at any point in time. The power lines can get compromised, a storm is bearing down on you or there is a curfew in your area. If you are prepared for power outages, you will get the opportunity to stay away from hassle during such a situation. Here is a list of 5 things that you must include in your emergency blackout kit that comes to your survival during a power outage.

1. A light producing object
It is extremely important for you to include an object that can product light without electricity in your blackout kit. It can be an emergency light, glow sticks or few candles. You need to keep them in an area that can easily be accessed. It is better if you can attach some stickers that glow in the dark, so that you can easily find them in the middle of the night without any hassle. You should also include a matchbox and a stash of batteries in your blackout kit.

2. A first aid kit
Emergencies can happen during power outages as well and if you want to stay away from hassle during such a situation, you need to keep a first aid around the home. The first aid kit should include pain medicine, antibiotic ointments such as Neosporin, and antiseptic solutions such as hydrogen peroxide, scissors, gauze tape and bandages of different sizes.

3. A battery powered radio
A battery powered radio can assist you to get latest updates about your neighborhood during a power outage. If you have a stash of batteries, you will be able to listen to the battery powered radio for several days. The radio can assist you to keep abreast of everything happening in your neighborhood during emergencies. For example, if there is a storm, the relevant authorities might issue an evacuation notice. The battery powered radio can give you enough time to prepare and it can even save your life during such instances. A radio is more reliable than internet or television.

4. A gas camping stove
When there's no electricity, you will find it as a difficult task to prepare food or heat water. Therefore, it is important for you to have a gas camping stove in your blackout kit. You should also keep charcoal or propane tank in storage to be used in such instances. Propane is more effective than charcoal in wet weather conditions.

5. A car charger or a power bank
When there is no electricity, you will not be able to recharge your mobile phones. Therefore, you must include a power bank or a car charger in your blackout kit. However, you need to have a basic understanding on how to use the car charger to recharge your mobile phone as well. Otherwise, you would end up killing your car battery. If you do not want to go through this hassle, you can simply keep a portable power bank or solar generator in your “just in case” or blackout kit.

Reduce Your Carbon Footprint With An Air Source Heat Pump

An air source heat pump is one of the most energy efficient means of heating your home and hot water there is. More and more homeowners are approaching air source heat pump suppliers because they have heard of the cost savings these appliances can bring, and the ways in which they can reduce a household’s…

An air source heat pump is one of the most energy efficient means of heating your home and hot water there is. More and more homeowners are approaching air source heat pump suppliers because they have heard of the cost savings these appliances can bring, and the ways in which they can reduce a household’s carbon footprint. We all need to do our bit to help the environment, and with an air source heat pump you can help to make a massive change to the way you use energy and reduce your impact on the…

How Changing LED High Bay Lighting Helps Efficiency

Right now there are a lot of companies stretching their operational budget. They are trying to figure out how to make money and maintain steady progress. As the quarters go by, many businesses will shut down, and one of the major reasons is because their operational costs are very high.

Right now there are a lot of companies stretching their operational budget. They are trying to figure out how to make money and maintain steady progress. As the quarters go by, many businesses will shut down, and one of the major reasons is because their operational costs are very high.

How To Select DC to DC Power Modules?

DC to DC power module with the outstanding performance, compact size and the notable feature of simplifying using has been used broadly in the field of networking, communications, railways, military, industrial control and other fields. Therefore, most of the engineers are well aware of the fact that selecting the right DC to DC power modules…

DC to DC power module with the outstanding performance, compact size and the notable feature of simplifying using has been used broadly in the field of networking, communications, railways, military, industrial control and other fields. Therefore, most of the engineers are well aware of the fact that selecting the right DC to DC power modules can actually debug issues, save designs and can help them to focus more in the field. These things do not only help to improve the reliability of overall system, but also shorten the total cycle of product development. Therefore, it becomes utmost important to select the right DC to DC power modules.

Apart from the most fundamental functions of voltage conversion, it is also necessary to consider the following factors. Here are the other ways you can select:

  • Package: Typically power modules are packaged in different forms. Some of these are compatible with the global standards and others are non-standard. In some cases, same rated power modules come with different packaging or the same package include different rated power. So, here are some criteria to choose the right power module:
    1. Select types compatible with global standards package as long as possible as here you will get better compatibility and it will be easy for you to find the replacement supplier.
    2. The module should have the features like upgrading, ease of system expansion and scalability
    3. The size of the module should be as much small as possible to save more space for other sections
  • Rated power: According to the general recommendation, the real power usage of the power module is 30-80%. Too low loads can result in waste and too high are comparatively not stable and these also produce too much heat. Most of the modules come with overload protection ability like these generally offer 120-150% bearing. But it is not at all recommended to work for a long time under these overload conditions.
  • Operating frequency: Commonly, the higher the frequency will be, there will be the smaller output ripple noise and better dynamic response. But here the cost would increase, especially the magnetic response. Commonly, the frequency of power module switching available in the market is under 300 kHz, or even about 100 kHz. Therefore, it becomes tough to meet with the requirements of dynamically response. So, before getting one, you must consider the usage of the high switching frequency products in applications of the strict requirements. Apart from that, the users also need to consider the fact that while the switch frequency of the power module is close to signal frequency, syntonic oscillation can take place.
  • Derating the range of temperature: Generally the power module manufacturers have several temperature ranges available, known as: military rank, industrial grade and commodity grade modules. So, while selecting the modules, you need to consider the actual needs of the operating temperature range. Different types of temperature level use different types of ways and materials and therefore the costs very vary. So, there are mainly two methods of selection:
    1. Select according to the temperature range
    2. Select on the basis of power and package usage

How to Save Energy at Home Without Compromise

Whether you are a household, married or single, your main expenditures, apart from school fees, rent, food and taxes, are for communication, entertainment and energy. Well, the taxes are a given, the communication and media are a need or a lifestyle choice. However, energy use is made too easy making this an area where savings…

Whether you are a household, married or single, your main expenditures, apart from school fees, rent, food and taxes, are for communication, entertainment and energy. Well, the taxes are a given, the communication and media are a need or a lifestyle choice. However, energy use is made too easy making this an area where savings are possible and in many cases these savings can be significant. If you know where you use the energy and when, you enable yourself to make educated choices to reduce your energy bill and improve your lifestyle at the same time. Basically, a more sustainable environment can be leading to a better lifestyle.

Energy Saving Does Make a Big Difference to Electricity Bills

Keeping up with the times has its many advantages. Consider CFL bulbs that most people have been using recently. Compared to the traditional incandescent bulbs that everyone grow up with, CFL bulbs consume 75% less energy. An ordinary bulb creates 90% of heat rather than light! Fluorescent tube lights too are preferable to the ordinary…

Keeping up with the times has its many advantages. Consider CFL bulbs that most people have been using recently. Compared to the traditional incandescent bulbs that everyone grow up with, CFL bulbs consume 75% less energy. An ordinary bulb creates 90% of heat rather than light! Fluorescent tube lights too are preferable to the ordinary bulb, consuming 70% less electricity. Since lighting is common to every home, task lighting and spot lighting would save on costs dramatically. For light on the study table, the entire room need not be flooded with light. Lighting devices should be dusted regularly. Dirty bulbs and tube lights waste a lot of energy. Dark walls and lamp shades would also waste energy, invest in lighter walls and shades. Timers and dimmers work automatically too and help Energy Saving.

Cooling the room in the summer heat

Many people simply manage the summer heat with fans that are the most cost effective in Energy Saving. Yet, if air conditioners are felt absolutely necessary, observe a few do's and don'ts to reduce energy consumption. Plants along the walls and windows of the building will reduce energy consumed drastically. The sun's heat will not affect so much. Research reveals that 25 degrees centigrade for the air conditioner is most effective in terms of costs. Using a timer, switch off the air conditioner after thirty minutes. Keep the doors closed to avoid heat entering and cool air escaping. Clean the air conditioner filter often.

Manage computers, refrigerators cleverly to save energy

It is very common to see computers switched on the whole day, especially during office hours. The computer is consuming a lot of energy that could have been saved. Switching off the monitor would save half that energy. Using the sleep mode option when not in use also reduces energy consumption considerably. Battery chargers should not be left plugged into sockets as they drain energy all the time. Screen savers require more energy while startups and shutdowns do not. Switching off computers after the task is done would be good for both the computer and the energy bill.

The refrigerator should be protected from any source of heat which is obvious. Allow enough space around the fridge for the heat from motors and compressors to escape. Minimize keeping the door open as it would result in loss of cooling. Do not pack the fridge excessively, since air must circulate within. Whatever is placed inside must be cool enough, not even warm, that will result in more energy being used. Check the door seals and clean coils regularly. Defrost the freezer in the manual fridge. Energy Saving is an environmental duty!

Finding a Provider to Take You Off the Grid

Producing your own electricity to use at home or for a business is very exciting. The solution is to find a provider of solar power systems Brisbane with the right skills, information, and products to help you be successful with it. Make contact with providers to see what they can offer for you. Consulting Spend…

Producing your own electricity to use at home or for a business is very exciting. The solution is to find a provider of solar power systems Brisbane with the right skills, information, and products to help you be successful with it. Make contact with providers to see what they can offer for you.

Consulting

Spend time consulting with providers of solar power systems Brisbane to see what they can do for you. It is going to impress you when you find out how quickly they can get a plan in motion. It does not take long for them to install the materials or for you to reap the benefits. They can explain to you the best options for your needs and benefits.

They can also explain the cost involved with you. It is far less expensive than you may think to get this done. You are not going to know that cost until you get into the specifics with the various solar power systems Brisbane providers. Then you can compare the estimates and what is offered.

Verifying the Provider Information

Always take the time to verify the information any solar power systems Brisbane provider offers you. They should put it in writing with specific details to verify what you will get, what you will pay, warranty information, and other pertinent details. Never sign such an agreement until you have fully read and you completely understand it.

Environmental Help

Going this route allows you to feel great about your contribution to the environment. Knowing you are no longer depleting the environment of resources that can not be replaced feet great. You are just one person but there are many others embracing this type of service too. The numbers continue to grow annually, and that is very encouraging.

Financial Savings

In addition to the environmental benefits, there are financial savings too. When you work with any solar power systems Brisbane provider, consider it an investment. Over time, what you pay for it is going to pay for itself. When you are off the grid, you do not pay anything for your monthly electricity use.

When you do not produce enough power to go completely off the grid, you will only be charged for what you do use. This is still going to be significantly less than what you are paying monthly right now. The cost of electricity continues to increase so over time, you would be paying more and more for it if you do not make any types of changes.

Solar power is simple to benefit from and the systems are very easy to maintain. It is rare that anything will have to be done for the system. If there is an issue, the installer should take care of it. Make sure they offer you a wonderful warranty so you can confidently rely on them if there are any concerns down the road.

Make it a Priority

Now is the time to take advantage of what solar power systems Brisbane have to offer. They are lower in price than in the past. The technology offered is better than ever so you can use this to take you off the grid. Do not put off finding out what you have been missing. Get the right information so you can move forward with making this a reality for your home or a business.

Gather the information, ask questions, evaluate providers, and get a plan in motion. This could be your chance to make a positive change you are very happy with. The sooner you get it done, the more you can benefit.

Getting Off the Grid!

The amount of electricity you use for your home or business adds up over time. The cost seems to go up too. This means when your consumption increases, you are very likely to see a spike in your bills. Getting off the grid and being in control of that energy use is possible with the…

The amount of electricity you use for your home or business adds up over time. The cost seems to go up too. This means when your consumption increases, you are very likely to see a spike in your bills. Getting off the grid and being in control of that energy use is possible with the implementation of stand alone power systems. It is worth checking into them and learning more.

There are several options you may consider to make this happen. It means you are relying on solar energy or other alternative for you to collect energy to be used as electricity. Create enough of it to complete all of your uses and you will not have to pay the electric company at all. If you do not create enough, you will only pay for what you use. The goal is not to have to pay for it at all.

Getting Started

Being well informed is the first place to start when it comes to getting off the grid. You need to look at the pros and cons the various stand alone power systems can offer. You also need to look at the installation process and the cost. There is a good match for every need and every budget. Such systems are far less expensive today than they used to be. That is encouraging!

Evaluate the various choices you have too. While many people think about solar energy when they consider stand alone power systems, that is just one possibility. The use of wind power and hydro power can also be great possibilities depending on where you stay. The goal is to identify the resources you have the most of and can realistically use.

Evaluating Resources

Solar energy is the most common of the stand alone power systems because the sun is always there. Of course, where you stay can influence how many days and hours of sunlight you gain. The time of year can also influence it. You may not realize you can still collect solar energy on cloudy days.

This process often involves collector cells being placed on the roof of a home or business. These panels collect the sunlight and it is converted into electricity. They are essentially maintenance free and they work well for large scale needs. Wind power can be a great choice if you live in an area where it is often windy.

The amount of wind on a daily basis though can be much harder to determine than the anticipated energy from the sunlight. This is one element that has to be carefully looked at before moving forward with it as the right stand alone power systems to select. Hydro power relays on water but this is very expensive. That is why it is often refrained from by individuals.

That is more of an option for larger companies and corporations to get involved with. For small businesses and homes, you may wish to consider one of the smaller scale stand alone power systems. This includes a power inverter or a battery bank. They allow you to create the energy you need without being on the grid. Such options are not realistic for a larger business though.

Cost and Installation

The overall cost of the implementation depends on the method you select and who is going to install it for you. Carefully make your selection of type based on the most benefit to you. When this is done correctly, the cost of the materials and installation will more than pay for themselves in a short amount of time. When you go off the grid, you never have to pay for electricity again!

Properly Storing Your Energy Collecting Batteries

It is important to understand the various home battery storage options available. You never want to leave such an item out there in the open. It can be damaged due to the elements or people around it. Children and pets can mess with it and that can pose a danger to them. They can also…

It is important to understand the various home battery storage options available. You never want to leave such an item out there in the open. It can be damaged due to the elements or people around it. Children and pets can mess with it and that can pose a danger to them. They can also become an eyesore. You want them to work well and to last so store them properly.

Do not worry, there are means to make this set up work well for you. Placing the home battery storage component in an area where it will not be in the way is important. It should be secured in an approved container so that there are not problems due to exposure.

Combo Set Up

With a home battery storage set up, there is typically a combo set up in place. It involves both solar panels in place and a battery that is in a secure box. The goal of this is to be able to store enough of the energy collected during the day to use through the nighttime hours. As a result, a household can go completely off the grid.

The type of set up and the size of battery you will receive depends on your needs. Typically, this is discussed with the solar panel installer. They will share with you what they feel you need based on your ability to create electricity, your household size, and the typical energy use of your household on a monthly basis.

They will average it over at least a year since the amount you use can vary during certain times of the year. That will ensure that they do not estimate too low and then you struggle to have enough to stay off the grid during those busier times of the year.

Backup Power Supply

Depending on the type of product you purchase, the home battery storage is going to hold about 20% of the energy it has as a reserve. Should you be going through a blackout for a period of time, it will work as a backup. Not only will this give you energy when you need it, this can prevent your food from spoiling and other concerns in your home.

If you live in an area where it is extremely hot or cold during times of the year, you may rely on electricity to for your heating and cooling needs. With your home battery storage reserve supply, you will have the means to still have those resources available to you until the power comes back on. This can be a wonder solution so you are not doing without.

Evaluate the Options

Making the move to solar energy is a wonderful way to save money and to ensure you do something great for the environment. Take the time to evaluate your options so you are able to make a decision that is right for your needs. Consult with providers in your area to make sure you get the very best products.

What you have installed can make a significant impact on the value it offers to you in the end. Do not be disappointed because your home battery storage options were not right for your home. Many of the combos offered actually include this too so it is not going to be an additional expense for you to worry about.

Ask any questions you have too so you know what you are getting involved with, the cost, any warranty details, and more so you can move forward and not be stressed about what will happen or how it is going to happen. When you have the facts, it will all fall into place!

Overcome the Comfort Concerns and Go With an Energy Efficient Mini Split Branch Box

Years ago humans left living in rock caves and shifted to an abode that is not only luxurious, but at the time same has everything that can ensure a comfortable and safe living. Several appliances have emerged in the market that promises homeowners of a cozy and comfortable environment inside their homes – the mini…

Years ago humans left living in rock caves and shifted to an abode that is not only luxurious, but at the time same has everything that can ensure a comfortable and safe living. Several appliances have emerged in the market that promises homeowners of a cozy and comfortable environment inside their homes – the mini split system is one of them.

Solar Energy and a Changing World

The popularity of solar energy has always been tied to the viability of its competing energy sources. Every oil embargo or energy crisis sees the popularity of solar rise, and then fade when the supply of cheaper fossil fuels returns to normal.

The popularity of solar energy has always been tied to the viability of its competing energy sources. Every oil embargo or energy crisis sees the popularity of solar rise, and then fade when the supply of cheaper fossil fuels returns to normal.

Reduce Your Electrical Bill – Solar and Battery Calculations for Residential Use

It's that time of month again. You open your mailbox (or for the more progressive, your email) and find the most dreaded of bills – your Hydro bill. For many home owners they accept the fact that they will have to continue to pay for this utility. Yet there is another group that is quietly…

It's that time of month again. You open your mailbox (or for the more progressive, your email) and find the most dreaded of bills – your Hydro bill.

For many home owners they accept the fact that they will have to continue to pay for this utility. Yet there is another group that is quietly exploring alternatives. These people are looking at ways that they can generate their own power and reduce – or in some cases eliminate – their relationship upon the electrical grid.

The solution this article explores is the combination of solar PV (photovoltaic) and small scale battery storage to generate and store the power that the household needs. To be upfront, there is a cost of exploring this alternative – however it is one that will benefit you and your family long into the future. By installing a solar array on (or if you have the ability) near your house you can generate power. This power is then stored in a series of batteries that can be 'drawn on' when needed. Through inverter technology your array can prioritize demand to draw from batteries before the grid is utilized.

Depending upon the amount of power you use, and the number of solar panels and batteries you install your payback can come as quickly as 6 years by using equipment that will operate for well over 20 years (meaning approximately 14 years of 'free' power through the installation of a system). Sounds interesting, does not it? But where do you start?

If you are trying to calculate how much 'solar' you will need there is some simple math you can perform. If you look at your utility bill you'll see an amount of power that you used. This is shown in kWh. Your bill may also show you your usage in kWh for the last year.

There are two ways to look at this. Firstly is the average of your usage over the twelve months. Using this method will result in designing a system that will result in periods where the power generated will not provide enough power to entire home but it will average out over the year. The second way is to design for your 'peak' usage – in most residences this will be during the summer when air conditioners and pools are driving up electrical costs. In this case you may produce too much power and end up 'giving back' some power to the utility once your batteries are fully charged. In both cases you want to calculate the average daily usage in kWh. For illustration purposes let's assume you need to produce an average of 30 kWh per day.

To determine the number of panels we need to take the daily kWh usage and divide it by the number of hours of sunlight. If we use seven hours for the purpose of calculation we would have 30 kWh divided by 7 hours or 4.29 kW from your solar array. If you are using 250 w panels in your array, the following formula would apply: 4.29 (kW) divided by 250/1000 (kW) or 17.1 panels would be needed to offset 30 kWh per day in * ideal * conditions.

At this point you need to be sure your roof or 'area' can accommodate 18 (you can not have 17.1) panels and that it would receive seven hours of sunlight a day and there are no obstacles blocking the panels.

Your best bet after performing these simple calculations is to locate someone that can assist you with the engineering and calculations as well as the implementation of your project. Completed properly this solution could remove – or at the least drastically reduce – your power bill.